- Advanced switch-mode power supply technology for high performance and compact size
- Power Factor Correction PFC for extremely low mains consumption and wide mains
operating range
- Variable speed fan for low noise
- Active Inrush Limiting eliminates AC inrush current, removing the need for expensive
power sequencers
- XLR female / male Neutrik style input connectors with link capability
- Built -in Clip limiters
- Detented gain controls for fast and accurate gain settings
- Comprehensive front panel indicators including signal, clip, high frequency, protect
and thermal forecast
- Fully protected circuitry design including DC, infrasonic, high frequency,
thermal overload and short circuit
- Fixed frequency switchmode output stage for high grade sound accuracy
- Compact size - all models only 1 RU for reduced rack cost and space
- Light weight - all models only 21 pounds (9.5 kg) for easier racking and shipping
DIGAM 7000 DIGAM 5000
..........................................................................................................................................................................................
2Ω quad 3500 W 2500 W
..........................................................................................................................................................................................
4Ω quad 1910 W 1360 W
..........................................................................................................................................................................................
8Ω quad 1050 W 750 W
.........................................................................................................................................................................................
|
|
|
Channels: |
|
2 |
Bandwidth (1W, 8Ω): |
|
10Hz-40KHz |
SNR (20Hz-20KHz A-weighted): |
|
>100dB |
Distortion THD: |
|
Max < 0,5% from 0,1W to full power
(tipically < 0,1%) |
Intermodulation distorsion DIM100: |
|
Max < 0,02% from 0,1W to full power
(tipically < 0,01%) |
Intermodulation distorsion SMPTE: |
|
Max < 0,5% from 0,1W to full power
(tipically < 0,1%) |
Damping Factory (8Ω): |
|
> 300 @ 100Hz |
Voltage Gain: |
|
36,9dB/1.10 Vrms (Digam5000)
38,2dB/1.12 Vrms (Digam7000)
or
26dB internal selection for both models |
Slew Rate (8Ω): |
|
50V/µS (input filter bypassed) |
|
|
|
Power Section: |
|
|
AC Line Voltages: |
|
95 - 130V (only D5000) or 200 - 265V
(50 / 60 HZ) (D5000, D7000) |
Power Factory cos (fi): |
|
More than 0,95 from 200W to full power |
Operating Environment
Temperature: |
|
0oC / +45oC |
Consumption Average: |
|
1350 VA (D7000), 1050 VA (D5000) |
|
|
|
Input / Output: |
|
|
Input Connectors: |
|
Balanced to groud,
XLR female combo Jack 6.3mm |
Input Impedance: |
|
10 KΩ each leg, electronically balanced to ground |
Output Connectors: |
|
NeutrickR4-pole SpeakonR connectors,
pins 1+, 2+ paralleled
pins 1-, 2- paralleled |
|
|
|
|
|
|
Protections: |
|
|
DC protection: |
|
protects against infrasonic signals |
VHF protection: |
|
protects the loudspeakers against strong very
high frequency non-musical signals above
the audible range. |
Thermal protection: |
|
prevents the amplifier from being overheated.
The protection indicators on the front panel are
switched on, as a warning, before
the protection process is initiated. |
AC protection: |
|
shuts down the power supply if the line voltage
is outside the operating voltage. |
Clip limiter: |
|
prevents severely clipped waveforms from
reaching the loudspeakers, whilst maintaining
full peak power. |
|
|
|
|
|
|
Controls / Indicators: |
|
|
Front Panel: |
|
Led bar indicator, signal, protect, temp, ready.
Channel gain control knobs. |
|
|
|
|
|
|
Construction: |
|
|
External Dimension: |
|
Standard rack 19" - 1 unit (HxWxD)
44x482x455mm
Weight: 9,5 Kg |
|
|
|
|
|
|
Main Applications: |
|
|
|
|
Tourning, Instalations |
|